diff --git a/install/hardware/all.sh b/install/hardware/all.sh
index 19b26b7eb78..05c3d8a2673 100644
--- a/install/hardware/all.sh
+++ b/install/hardware/all.sh
@@ -45,6 +45,7 @@ run_logged "$OMARCHY_INSTALL/hardware/qualcomm/kernel-params.sh"
 run_logged "$OMARCHY_INSTALL/hardware/qualcomm/firmware.sh"
 
 run_logged "$OMARCHY_INSTALL/hardware/lenovo/fix-yoga-pro7-bass-speakers.sh"
+run_logged "$OMARCHY_INSTALL/hardware/lenovo/yoga-slim7x.sh"
 
 run_logged "$OMARCHY_INSTALL/hardware/fix-bcm43xx.sh"
 run_logged "$OMARCHY_INSTALL/hardware/fix-surface-keyboard.sh"
diff --git a/install/hardware/lenovo/start-yoga-slim7x-remoteprocs.sh b/install/hardware/lenovo/start-yoga-slim7x-remoteprocs.sh
new file mode 100644
index 00000000000..ec7a5c94197
--- /dev/null
+++ b/install/hardware/lenovo/start-yoga-slim7x-remoteprocs.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+
+set -euo pipefail
+
+remoteproc_root=${OMARCHY_YOGA_REMOTEPROC_ROOT:-/sys/class/remoteproc}
+attempts=${OMARCHY_YOGA_REMOTEPROC_ATTEMPTS:-30}
+sleep_seconds=${OMARCHY_YOGA_REMOTEPROC_SLEEP:-1}
+
+for ((attempt = 1; attempt <= attempts; attempt++)); do
+  adsp_started=0
+  shopt -s nullglob
+
+  for state_file in "$remoteproc_root"/remoteproc*/state; do
+    remoteproc=${state_file%/state}
+    [[ -r $remoteproc/firmware && -r $state_file ]] || continue
+
+    firmware=$(tr -d '\0\n' <"$remoteproc/firmware")
+    case "$firmware" in
+      *qcadsp*) kind=ADSP ;;
+      *qccdsp*) kind=CDSP ;;
+      *) continue ;;
+    esac
+
+    if [[ $(<$state_file) == running ]]; then
+      echo "Yoga Slim 7x: $kind is already running"
+      [[ $kind == ADSP ]] && adsp_started=1
+    elif [[ -w $state_file ]] && printf 'start\n' >"$state_file"; then
+      echo "Yoga Slim 7x: started $kind"
+      [[ $kind == ADSP ]] && adsp_started=1
+    else
+      echo "Yoga Slim 7x: could not start $kind ($firmware)" >&2
+    fi
+  done
+
+  ((adsp_started)) && exit 0
+  sleep "$sleep_seconds"
+done
+
+echo "Yoga Slim 7x: audio DSP did not appear or could not be started" >&2
+exit 1
diff --git a/install/hardware/lenovo/yoga-slim7x.sh b/install/hardware/lenovo/yoga-slim7x.sh
new file mode 100644
index 00000000000..2c9ed5c7312
--- /dev/null
+++ b/install/hardware/lenovo/yoga-slim7x.sh
@@ -0,0 +1,68 @@
+# Lenovo Yoga Slim 7x (14Q8X9 / 83ED) board-specific setup.
+
+yoga_slim7x_compatible=""
+compatible_path=${OMARCHY_YOGA_COMPATIBLE_PATH:-/sys/firmware/devicetree/base/compatible}
+modules_load_dir=${OMARCHY_YOGA_MODULES_LOAD_DIR:-/etc/modules-load.d}
+mkinitcpio_dir=${OMARCHY_YOGA_MKINITCPIO_DIR:-/etc/mkinitcpio.conf.d}
+limine_config_dir=${OMARCHY_YOGA_LIMINE_CONFIG_DIR:-/etc/limine-entry-tool.d}
+systemd_dir=${OMARCHY_YOGA_SYSTEMD_DIR:-/etc/systemd/system}
+
+if [[ -r $compatible_path ]]; then
+  yoga_slim7x_compatible=$(tr '\0' '\n' <"$compatible_path")
+fi
+
+if omarchy-hw-qualcomm-soc &&
+  { grep -qi '^lenovo,yoga-slim7x$' <<<"$yoga_slim7x_compatible" ||
+    omarchy-hw-match 'Yoga Slim 7x' || omarchy-hw-match '83ED'; }; then
+  echo "Detected Lenovo Yoga Slim 7x, applying board-specific support..."
+
+  # The Yoga exposes its CPU performance domains through SCMI.
+  mkdir -p "$modules_load_dir"
+  echo "scmi-cpufreq" >"$modules_load_dir/yoga-slim7x.conf"
+
+  # Initialize the internal keyboard and display before disk unlock.
+  mkdir -p "$mkinitcpio_dir"
+  cat >"$mkinitcpio_dir/yoga-slim7x-initramfs.conf" <<'CONF'
+MODULES+=(i2c-hid-of qrtr ps883x pmic_glink_altmode)
+
+# The board-signed zap shader is included by qcom-firmware-extract.
+for firmware in \
+  qcom/gen70500_sqe.fw \
+  qcom/gen70500_gmu.bin; do
+  for suffix in '' .zst .xz; do
+    for directory in "${OMARCHY_YOGA_FIRMWARE_ROOT:-/usr/lib/firmware}/updates" \
+      "${OMARCHY_YOGA_FIRMWARE_ROOT:-/usr/lib/firmware}"; do
+      if [[ -f $directory/$firmware$suffix ]]; then
+        FILES+=("$directory/$firmware$suffix")
+        break 2
+      fi
+    done
+  done
+done
+unset firmware directory suffix
+CONF
+
+  mkdir -p "$limine_config_dir"
+  cat >"$limine_config_dir/yoga-slim7x.conf" <<'CONF'
+KERNEL_CMDLINE[default]+=" initcall_blacklist=simpledrm_platform_driver_init"
+# Keep Plymouth and the keyboard hooks on the laptop console, not the serial port.
+KERNEL_CMDLINE[default]+=" console=tty0"
+CONF
+
+  # Start the board's DSP remote processors.
+  mkdir -p "$systemd_dir"
+  cat >"$systemd_dir/yoga-slim7x-remoteprocs.service" <<'UNIT'
+[Unit]
+Description=Start the Lenovo Yoga Slim 7x DSPs
+ConditionPathExists=!/etc/modprobe.d/qualcomm-adsp-nofw.conf
+
+[Service]
+Type=oneshot
+ExecStart=/bin/bash /usr/share/omarchy/install/hardware/lenovo/start-yoga-slim7x-remoteprocs.sh
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+UNIT
+  systemctl enable yoga-slim7x-remoteprocs.service
+fi
diff --git a/test/shell.d/yoga-slim7x-hardware-test.sh b/test/shell.d/yoga-slim7x-hardware-test.sh
new file mode 100644
index 00000000000..125210b0527
--- /dev/null
+++ b/test/shell.d/yoga-slim7x-hardware-test.sh
@@ -0,0 +1,161 @@
+#!/bin/bash
+
+set -euo pipefail
+
+source "$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)/base-test.sh"
+
+setup="$ROOT/install/hardware/lenovo/yoga-slim7x.sh"
+starter="$ROOT/install/hardware/lenovo/start-yoga-slim7x-remoteprocs.sh"
+scratch=$(mktemp -d)
+trap 'rm -rf "$scratch"' EXIT
+
+for script in "$setup" "$starter"; do
+  bash -n "$script" || fail "Yoga Slim 7x hardware scripts have valid syntax"
+done
+
+matching="$scratch/matching"
+mkdir -p "$matching"
+printf 'qcom,x1e80100\0lenovo,yoga-slim7x\0' >"$matching/compatible"
+(
+  omarchy-hw-qualcomm-soc() { return 0; }
+  omarchy-hw-match() { return 1; }
+  systemctl() { printf '%s\n' "$*" >>"$matching/systemctl.log"; }
+
+  OMARCHY_YOGA_COMPATIBLE_PATH="$matching/compatible" \
+    OMARCHY_YOGA_MODULES_LOAD_DIR="$matching/modules-load.d" \
+    OMARCHY_YOGA_MKINITCPIO_DIR="$matching/mkinitcpio.conf.d" \
+    OMARCHY_YOGA_LIMINE_CONFIG_DIR="$matching/limine-entry-tool.d" \
+    OMARCHY_YOGA_SYSTEMD_DIR="$matching/systemd" \
+    source "$setup"
+)
+
+grep -Fxq 'scmi-cpufreq' "$matching/modules-load.d/yoga-slim7x.conf" ||
+  fail "Yoga Slim 7x setup loads its SCMI CPU-frequency driver"
+(
+  firmware_root="$scratch/firmware"
+  mkdir -p "$firmware_root/qcom" "$firmware_root/updates/qcom"
+  touch "$firmware_root/qcom/gen70500_sqe.fw.zst" \
+    "$firmware_root/qcom/gen70500_gmu.bin.xz"
+  MODULES=() FILES=()
+  OMARCHY_YOGA_FIRMWARE_ROOT="$firmware_root" \
+    source "$matching/mkinitcpio.conf.d/yoga-slim7x-initramfs.conf"
+  [[ ${MODULES[*]} == "i2c-hid-of qrtr ps883x pmic_glink_altmode" ]] ||
+    fail "the generated config loads the keyboard and display modules"
+  (( ${#FILES[@]} == 2 )) || fail "GPU microcode is included without duplicating the board zap shader"
+  [[ ${FILES[0]} == "$firmware_root/qcom/gen70500_sqe.fw.zst" ]] ||
+    fail "zstd display firmware is included"
+  [[ ${FILES[1]} == "$firmware_root/qcom/gen70500_gmu.bin.xz" ]] ||
+    fail "xz display firmware is included"
+  touch "$firmware_root/updates/qcom/gen70500_sqe.fw"
+  FILES=()
+  OMARCHY_YOGA_FIRMWARE_ROOT="$firmware_root" \
+    source "$matching/mkinitcpio.conf.d/yoga-slim7x-initramfs.conf"
+  [[ ${FILES[0]} == "$firmware_root/updates/qcom/gen70500_sqe.fw" ]] ||
+    fail "plain extracted firmware takes precedence over compressed packaged firmware"
+)
+(
+  declare -A KERNEL_CMDLINE=([default]="root=/dev/mapper/root quiet splash")
+  source "$matching/limine-entry-tool.d/yoga-slim7x.conf"
+  [[ " ${KERNEL_CMDLINE[default]} " == *" console=tty0 "* ]] ||
+    fail "Yoga Slim 7x uses the laptop console for graphical disk unlock"
+  [[ " ${KERNEL_CMDLINE[default]} " == *" initcall_blacklist=simpledrm_platform_driver_init "* ]] ||
+    fail "Yoga Slim 7x defers display ownership to the native driver"
+  [[ ${KERNEL_CMDLINE[default]} == "root=/dev/mapper/root quiet splash "* ]] ||
+    fail "Yoga Slim 7x preserves the existing boot parameters"
+)
+grep -Fq 'ConditionPathExists=!/etc/modprobe.d/qualcomm-adsp-nofw.conf' \
+  "$matching/systemd/yoga-slim7x-remoteprocs.service" ||
+  fail "Yoga Slim 7x skips DSP startup when the generic firmware leaf blacklists it"
+if grep -Fq 'systemd-udev-settle.service' "$matching/systemd/yoga-slim7x-remoteprocs.service"; then
+  fail "Yoga Slim 7x DSP startup does not wait for all udev devices"
+fi
+grep -Fxq 'enable yoga-slim7x-remoteprocs.service' "$matching/systemctl.log" ||
+  fail "Yoga Slim 7x enables its remote processor service"
+
+nonmatching="$scratch/nonmatching"
+mkdir -p "$nonmatching"
+printf 'qcom,x1e80100\0hp,elitebook-ultra-g1q\0' >"$nonmatching/compatible"
+(
+  omarchy-hw-qualcomm-soc() { return 0; }
+  omarchy-hw-match() { return 1; }
+  systemctl() { fail "nonmatching Qualcomm hardware does not enable Yoga services"; }
+
+  OMARCHY_YOGA_COMPATIBLE_PATH="$nonmatching/compatible" \
+    OMARCHY_YOGA_MODULES_LOAD_DIR="$nonmatching/modules-load.d" \
+    OMARCHY_YOGA_MKINITCPIO_DIR="$nonmatching/mkinitcpio.conf.d" \
+    OMARCHY_YOGA_LIMINE_CONFIG_DIR="$nonmatching/limine-entry-tool.d" \
+    OMARCHY_YOGA_SYSTEMD_DIR="$nonmatching/systemd" \
+    source "$setup"
+)
+
+[[ ! -e $nonmatching/modules-load.d/yoga-slim7x.conf ]] ||
+  fail "nonmatching Qualcomm hardware does not get Yoga CPU setup"
+[[ ! -e $nonmatching/mkinitcpio.conf.d/yoga-slim7x-initramfs.conf ]] ||
+  fail "nonmatching Qualcomm hardware does not get Yoga initramfs setup"
+[[ ! -e $nonmatching/limine-entry-tool.d/yoga-slim7x.conf ]] ||
+  fail "nonmatching Qualcomm hardware does not get Yoga boot parameters"
+[[ ! -e $nonmatching/systemd/yoga-slim7x-remoteprocs.service ]] ||
+  fail "nonmatching Qualcomm hardware does not get Yoga services"
+
+(
+  omarchy-hw-qualcomm-soc() { return 0; }
+  omarchy-hw-match() { [[ $1 == "83ED" ]]; }
+  systemctl() { :; }
+  OMARCHY_YOGA_COMPATIBLE_PATH="$scratch/no-compatible" \
+    OMARCHY_YOGA_MODULES_LOAD_DIR="$nonmatching/modules-load.d" \
+    OMARCHY_YOGA_MKINITCPIO_DIR="$nonmatching/mkinitcpio.conf.d" \
+    OMARCHY_YOGA_LIMINE_CONFIG_DIR="$nonmatching/limine-entry-tool.d" \
+    OMARCHY_YOGA_SYSTEMD_DIR="$nonmatching/systemd" \
+    source "$setup"
+)
+[[ -f $nonmatching/modules-load.d/yoga-slim7x.conf ]] ||
+  fail "Lenovo DMI matching works without a device-tree compatible property"
+
+remoteprocs="$scratch/remoteproc"
+mkdir -p "$remoteprocs/remoteproc0" "$remoteprocs/remoteproc1" "$remoteprocs/remoteproc2"
+printf 'qcom/x1e80100/LENOVO/83ED/qcadsp8380.mbn\n' >"$remoteprocs/remoteproc0/firmware"
+printf 'offline\n' >"$remoteprocs/remoteproc0/state"
+printf 'qcom/x1e80100/LENOVO/83ED/qccdsp8380.mbn\n' >"$remoteprocs/remoteproc1/firmware"
+printf 'offline\n' >"$remoteprocs/remoteproc1/state"
+printf 'unrelated.mbn\n' >"$remoteprocs/remoteproc2/firmware"
+printf 'offline\n' >"$remoteprocs/remoteproc2/state"
+
+OMARCHY_YOGA_REMOTEPROC_ROOT="$remoteprocs" \
+  OMARCHY_YOGA_REMOTEPROC_ATTEMPTS=1 \
+  OMARCHY_YOGA_REMOTEPROC_SLEEP=0 \
+  bash "$starter"
+
+[[ $(<"$remoteprocs/remoteproc0/state") == start ]] ||
+  fail "Yoga Slim 7x helper starts the audio DSP by firmware identity"
+[[ $(<"$remoteprocs/remoteproc1/state") == start ]] ||
+  fail "Yoga Slim 7x helper starts the compute DSP by firmware identity"
+[[ $(<"$remoteprocs/remoteproc2/state") == offline ]] ||
+  fail "Yoga Slim 7x helper leaves unrelated remote processors alone"
+
+run_starter() {
+  OMARCHY_YOGA_REMOTEPROC_ROOT="$remoteprocs" \
+    OMARCHY_YOGA_REMOTEPROC_ATTEMPTS=1 \
+    OMARCHY_YOGA_REMOTEPROC_SLEEP=0 \
+    bash "$starter"
+}
+printf 'running\n' >"$remoteprocs/remoteproc0/state"
+printf 'running\n' >"$remoteprocs/remoteproc1/state"
+run_starter
+[[ $(<"$remoteprocs/remoteproc0/state") == running ]] || fail "running ADSP is not restarted"
+[[ $(<"$remoteprocs/remoteproc1/state") == running ]] || fail "running CDSP is not restarted"
+
+printf 'unrelated.mbn\n' >"$remoteprocs/remoteproc0/firmware"
+if run_starter; then fail "missing ADSP must time out, even when CDSP is running"; fi
+printf 'qcadsp8380.mbn\n' >"$remoteprocs/remoteproc0/firmware"
+printf 'offline\n' >"$remoteprocs/remoteproc0/state"
+(
+  printf() {
+    [[ $1 != "start\n" ]] || return 1
+    # shellcheck disable=SC2059 # Forward the caller's format unchanged.
+    builtin printf "$@"
+  }
+  export -f printf
+  if run_starter; then fail "a failed ADSP start must be reported"; fi
+)
+
+pass "Yoga Slim 7x adds only its board-specific keyboard, display, CPU and DSP setup"