DropdownMenu: on a phone the action sheet presents as iOS 26's does, an alert-style card

.changeset/action-group-tracker-one-writer.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] The internal action-group tracker paints its highlight through the one press writer in `utils/pressFeedback.ts`, as the document's press controller does, so neither cuts the other's fade short and a `held` paint is left alone. No component uses the tracker yet, and no package entry point exports it.
+
+@vjeux

.changeset/alertdialog-input-hold.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] AlertDialog: under a finger, its presentation and dismissal hold input through the shared Layer input hold instead of its own guards. While it fades out its content is inert and focus leaves it, then returns to the opener as before.
+
+@vjeux

.changeset/alertdialog-touch-action-tracking.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[fix] AlertDialog: its two actions are tracked as one group under every pointer, a finger, a pen or a mouse, the way iOS tracks an alert's actions. A press that lands on one action and slides to the other now runs the action it lifts on. Before, iOS Safari ran the action the finger first touched (Delete, when the finger slid to Cancel), and other browsers ran nothing and left the alert open. The pressed action highlights as soon as it is pressed instead of 150 ms later, the highlight follows the pointer between the actions, and lifting off both still runs nothing; a second finger or the window losing focus ends the press with nothing run. Only the actions are tracked: a press on the title or the message is not, and their text stays selectable with a mouse. The keyboard and assistive technology keep each button's own activation.
+
+@vjeux

.changeset/alertdialog-touch-motion.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[feat] AlertDialog: under a finger the alert appears and leaves the way an iOS alert does. It scales down into place from 1.2 while it and the dimming fade in, and it fades out with the dimming when it closes, on the alert's measured spring; the animation keeps running when the page is busy. While it appears a touch does nothing (keys and assistive technology still act), and while it leaves nothing reaches it: a touch, a click, a key or an assistive-technology activation does nothing. With reduced motion it only cross-fades. Defaults under a finger: on a phone (a compact width) the width with no `width` prop goes from 400 px to UIKit's 320 px in every theme, and this motion replaces the Dialog's entrance (rising 16 px and scaling up from 0.95 while it fades in) and its exit. With a mouse nothing changes. A `width` you pass still wins on a phone. The actions are tracked as one group under every pointer.
+
+@vjeux

.changeset/build-stylex-cross-file-consts.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/build': patch
+---
+
+[fix] `astryxStylex` resolves `defineConsts` values read from another file. With the `{stylexOptions}` form (the one Storybook uses), a file that read only constants from a `.stylex.ts` module lost that import once StyleX compiled it, so the constants never reached the CSS: a constant used as a media-query key failed the build ("Invalid empty selector") and one used as a value shipped as a custom property nothing declares. In either form, a constant defined on the other side of the layer split, or in an Astryx package (compiled with the library class-name prefix) and read from an app file (compiled with its own), stayed unresolved. The `{stylexOptions}` form now passes StyleX `treeshakeCompensation: true` by default (before, its babel pass ran with StyleX's default, `false`), as the plugin form already does; pass `treeshakeCompensation: false` in `stylexOptions` to restore the old behavior.
+
+@vjeux

.changeset/click-guard.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the gesture recognizers and the menu press model share one guard for the browser's click after a gesture that already acted, swallowing it for 400ms or until the next press. Keyboard and assistive-technology clicks (`detail` 0) always pass.
+
+@vjeux

.changeset/dropdownmenu-action-sheet-card.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[feature] On a compact touch screen (a phone, iOS or Android), DropdownMenu's `presentation="bottom-sheet"` with plain actions presents the way iOS 26 presents an action sheet: a centered, alert-style card that scales down from 1.2 and fades in with its dimming on the alert's spring, holds the actions and Cancel in one stack, tracks a finger across the actions as one group (the lift runs the action under it), and dismisses with a fade, on Cancel, Escape or a tap outside, returning focus to the trigger. A menu with sub-menus, links, rich labels, descriptions, end content, rows that stay open, a header or a footer keeps the bottom sheet, as do larger screens and mouse presentations.
+
+@vjeux

.changeset/dropdownmenu-submenu-in-place.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[feature] On a phone, a DropdownMenu sub-menu opens in place as UIMenu's does on iOS 26. The sub-menu's card grows down from the row it opened from, and the menu's box grows with it from the edge it is anchored by. The parent's rows stay under the card, faded to half and scaled to 97%. The sub-menu's header keeps the row's label, now semibold, with its chevron turned down, and is named by that label and then "Back to <parent>". Going back reverses it. The box plays UIKit's sub-menu springs. Under Reduce Motion the views cross-fade.
+
+@vjeux

.changeset/dropdownmenu-uimenu-placement.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[fix] DropdownMenu and MoreMenu opened with a mouse no longer start the touch presentation's motion code; on a phone the menu keeps opening beside its trigger, as on a larger screen.
+
+@vjeux

.changeset/dropdownmenu-uimenu-touch.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[feature] Under a finger, on every touch device, DropdownMenu and MoreMenu grow out of their trigger on UIKit's open spring and collapse back into it on the close spring, as UIMenu does. Both run on the compositor and can be interrupted either way. Under Reduce Motion the menu fades in place (the animator's policy). A pan that starts outside the open menu dismisses it as the page scrolls, and focus that was in the menu returns to the trigger. Under a mouse, or with `presentation="popover"`, the menu keeps the layer's entrance and the theme's motion.
+
+@vjeux

.changeset/gesture-arena-moving-cancel.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: a claimed gesture cancelled while one of its fingers is moving keeps that moving finger claimed until it lifts, so the page never takes the drag over midway; a resting finger is still given back when its gesture is cancelled. Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-browser-negotiation.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: touch-action derivation, the native scroll probe and haptics for the gesture system. Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-hook-fixes.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the gesture hooks call nothing back after unmount; `usePressTracker` brakes with the host by default and keeps one tracker, so an option change or a new ref never drops a press in progress; the recognizer's arena plumbing is `protected`. Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-host-fixes.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: gesture host fixes from review. A page scroll under a still finger keeps the press and its click; watchers and touches nothing can claim get passive listeners only; a claimed pen holds only its own stylus touches; an element's own `touch-action` is never widened; slotted content scrolls with its shadow-tree scroller. Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-host-owner.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the gesture host becomes the one document-level touch owner: the finger count, touch gates, and a kept press for continuous-tracking controls, whose element gets `touch-action: manipulation` where the pointer is coarse. A scroll lock's page hold and the finger-scroll watch keep their own listeners and ask the host only about the touches it owns. A second finger fails a one-finger pan that has not claimed, so the page can pinch. A scroll-edge pan holds a lone finger from the first move that pulls away from an edge every scroller under it is at, so those moves are cancelled before it begins; with a second finger anywhere on the screen the page keeps its pinch. The host follows the primary pointer when it changes; what it attaches under a fine pointer is in the every-pointer changeset (`gestures-every-pointer.md`). A press tracker whose hold acts (a stepper's hold-repeat) can bring a selection lock for its presses, as a recognizer can. Internal, for the touch components that adopt them; not exported from the package entry point.
+
+@vjeux

.changeset/gesture-host.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the gesture system's DOM host (claims, click suppression, the browser's takeover, the pointer behind a contact). Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-pan.md

@@ -2,6 +2,6 @@
 '@astryxdesign/core': patch
 ---
 
-[chore] Internal: the pan gesture recognizer, with UIKit's measured hysteresis and velocity filter. Not exported from the package entry point; no component uses it yet.
+[chore] Internal: the pan gesture recognizer, with UIKit's measured hysteresis and velocity filter. Not exported from the package entry point.
 
 @vjeux

.changeset/gesture-press-tracking.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: UIControl press tracking with control and cell profiles and the gesture hooks. `paintPress` in `utils/pressFeedback.ts` writes `data-astryx-press` for every press it tracks; the action-group tracker writes its groups' presses itself. Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-readme.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the gesture system's README for component authors, with its browser proof in Chromium and WebKit.
+
+@vjeux

.changeset/gesture-recognizer-core.md

@@ -2,6 +2,6 @@
 '@astryxdesign/core': patch
 ---
 
-[chore] Internal: the gesture recognizer core for touch presentations: UIKit's recognizer state machine and the arena that settles which recognizer owns a touch. Not exported from the package entry point; no component uses it yet.
+[chore] Internal: the gesture recognizer core for touch presentations: UIKit's recognizer state machine and the arena that settles which recognizer owns a touch. Not exported from the package entry point.
 
 @vjeux

.changeset/gesture-recognizer-fixes.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: gesture recognizer and arena fixes from review; a pan claims nothing before it begins at 10 pt; one velocity tracker for every gesture (`spec:AST-100`: UIKit's measured blend, a scrolling surface's release through the pan's `scrollVelocity()`, and FR2's release rules). Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-swipe-pinch-rotation-edge-hover.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: swipe, pinch, rotation, screen-edge pan and hover gesture recognizers. Not exported from the package entry point.
+
+@vjeux

.changeset/gesture-tap-long-press.md

@@ -2,6 +2,6 @@
 '@astryxdesign/core': patch
 ---
 
-[chore] Internal: tap and long-press gesture recognizers with UIKit's measured thresholds. Not exported from the package entry point; no component uses them yet.
+[chore] Internal: tap and long-press gesture recognizers with UIKit's measured thresholds. Not exported from the package entry point.
 
 @vjeux

.changeset/gesture-watcher.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: a recognizer created with `claimsTouches: false` is a watcher: passive listeners only, simultaneous with every recognizer, and it follows a touch the browser takes for a scroll to the lift. Not exported from the package entry point.
+
+@vjeux

.changeset/gestures-every-pointer.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: gestures attach for every pointer, a mouse, a pen and a finger alike (AST-094 FR43). Under a fine primary pointer an element that uses a gesture keeps one passive `pointerdown` listener (a recognizer that claims a moving finger also keeps its blocking `touchmove`, and a kept press gets its own only during a press), the page's listeners last only a press and go at a window blur, and a hovering mouse or pen reaches a hover recognizer through two passive listeners on its element. A pen's barrel button, like a right click, starts no press. A right click or a ctrl-click on macOS starts no press. A finger's or a pen's hold that does something keeps text unselected under any primary pointer, a touchscreen laptop's included, while a mouse keeps its released behavior (FR41). A mouse or pen drag that a recognizer claims takes no text selection from then on, anywhere on the page, and a finger is read once where the browser sends Touch Events without exposing `ontouchstart`. A press tracker takes a mouse press as a press, painting at once with no scroll brake. The screen-edge pan is a finger's only: it stays off under a mouse, a trackpad and a pen, and takes no `allowedPointerTypes`, and `perEventPointer` is accepted and does nothing. Not exported from the package entry point.
+
+@vjeux

.changeset/input-stream.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[fix] The touch press feedback and the gesture recognizers now hear page-wide input through one shared stream on the window's capture phase, so an app's window-capture `stopPropagation`, or a document-capture `stopImmediatePropagation` registered before Core, no longer hides a touch from them. A recognizer that must claim a touch mid-gesture still needs the touch to reach its element. Each event type's listener is passive unless a subscriber cancels it (the gesture host's `touchend` and `contextmenu` while a claiming recognizer or press tracker is attached, the page hold's `touchmove` while it holds, and the click guard's `click` once it first arms), so a page of pressables registers no listener that can hold a scroll.
+
+@vjeux

.changeset/layer-exit-copy.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the layer runtime gains one exit copy for touch presentations that animate a popover out: a static, inert copy of the closing popover, shown only in the top layer where the popover was drawn, for the close to play on.
+
+@vjeux

.changeset/layer-input-hold.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: one input hold for every layer (`Layer/inputHold`). While a layer presents, a touch, a press or a click anywhere reaches nothing (keys and assistive technology still act, and a pinch still zooms the page); while it dismisses, the same, and the layer's content is inert. The gesture host holds the layer's touches through its touch gates, and `isInputShield` lets a hit test see past a hold's shield. Not exported from the package entry point; no component uses it yet.
+
+@vjeux

.changeset/long-press-one-source.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: `useLongPress` (ContextMenu's long press, and the held finger that opens a menu from its trigger) takes its default duration and tolerance, 500ms and 10px on either axis, from the same source as the long-press gesture recognizer. No behavior changes.
+
+@vjeux

.changeset/menu-press-handoff.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[feature] Under a finger, on every device, the finger that opened a DropdownMenu or MoreMenu now picks a row only after it has moved 10 px (`spec:AST-094` FR29, FR43), so a menu that appears under a resting finger never picks the row beneath it, however long the finger rests. To keep the previous behavior, where that finger's lift picked once the press had lasted 300 ms, pass `presentation="popover"`. A mouse and the public `useMenuPress` hook are unchanged.
+
+@vjeux

.changeset/menu-press-uimenu.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[feature] Under a finger, on every device, a DropdownMenu or MoreMenu trigger now opens its menu as the finger presses, instead of after a 500 ms hold (`spec:AST-094` FR29, FR43). Inside a scroll view it opens once the 150 ms content-touch delay has passed with no scroll, so a scroll that starts on it still scrolls. To keep the previous behavior, a tap that opens at the lift and a 500 ms hold, pass `presentation="popover"`. A mouse is unchanged.
+
+@vjeux

.changeset/menu-trigger-drift.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[fix] A finger held on a DropdownMenu trigger may drift up to 13px on each axis and still open the menu under every primary pointer, a phone's, a tablet's and a touchscreen laptop's alike, as AST-094 FR29 allows; it cancelled past 10px. No menu, row or trigger reads the pointer query.
+
+@vjeux

.changeset/presentation-resolver.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] An internal `usePresentation` / `readPresentation` resolves a component's `presentation` prop into the surface to render and whether its touch input modes apply, keeping an omitted value distinct from an explicit `'popover'` so a caller's choice always wins over a touch default. Not exported from the package entry point.
+
+@vjeux

.changeset/presented-hit-testing.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] On iOS, a touch on an element the compositor animator is moving reaches what is drawn: the animator reports each moving element's offset from its layout box, and the gesture host sends the touch, press bounds and the tap's click there instead of to the layout position iOS WebKit hit-tests.
+
+@vjeux

.changeset/press-group-item-marker.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the touch press controller leaves the press of an action marked as tracked by its group (`data-astryx-press-group-item`) to that group's own tracker, so one writer paints each press. No component carries the marker yet, so nothing visible or behavioral changes.
+
+@vjeux

.changeset/reduced-motion-record.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: Reduce Motion for the touch presentations follows design:reduced-motion beyond the animator too. `reducedMotionFade()` gives code beside the animator the animator's own fade (an opacity-only 200 ms cross-fade on a coarse pointer or after a touch release, at once on any other pointer), `animator.reducedMotion()` reports which form a change takes for feedback that plays no fade of its own, and `reducedMotion.stylex.ts` holds the fade's constants for StyleX transitions. The fade's length is not a theme motion role. Not exported from the package entry point.
+
+@vjeux

.changeset/touch-motion-theme-roles.md

@@ -2,6 +2,6 @@
 '@astryxdesign/core': patch
 ---
 
-[chore] Internal: the touch motion tables register their springs, durations and curves as internal motion roles, each read once when a motion starts, so every component keeps its measured value. Nothing public changes: themes do not set motion roles, and no shipped component reads the roles yet.
+[chore] Internal: the touch motion tables register their springs, durations and curves as internal motion roles, each read once when a motion starts, so every component keeps its measured value. Nothing public changes: themes do not set motion roles. DropdownMenu's touch grow and collapse read `springs.menuOpen` and `springs.menuClose`.
 
 @vjeux

.changeset/touch-selection-lock-gestures.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[chore] Internal: the gesture host applies a recognizer's own `selectionLock` to that recognizer's contact and imports no lock itself; a long press brings one only when it has a hold (a `minimumPressDuration` above 0), and `selectionLock: null` opts out. Not exported from the package entry point.
+
+@vjeux

.changeset/touch-selection-lock.md

@@ -0,0 +1,7 @@
+---
+'@astryxdesign/core': patch
+---
+
+[fix] Where the primary pointer is fine (a mouse, a trackpad, a touchscreen laptop, a desktop pen tablet), the press feedback controller no longer registers a touch listener: it reads the primary pointer at the first finger or pen press and keeps its `touchcancel` listener only while that pointer is coarse.
+
+@vjeux

.changeset/uikit-constants-table.md

@@ -2,6 +2,6 @@
 '@astryxdesign/core': patch
 ---
 
-[chore] Internal: the UIKit constants table for touch presentations (springs, scroll physics, timing curves and navigation values), each value with its source and a checked list of the simulator measurements still owed. Not exported from the package entry point; no component reads it yet.
+[chore] Internal: the UIKit constants table for touch presentations (springs, scroll physics, timing curves and navigation values), each value with its source and a checked list of the simulator measurements still owed. Not exported from the package entry point.
 
 @vjeux