You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Voxtype does not symlink to voxtype-vulkan on Vulkan enabled system #7099
Kimi K3 Root cause: voxtype setup gpu --enable rewrites the root-owned /usr/bin/voxtype symlink, but omarchy-voxtype-install ran it as your user — hence "Permission denied (os error 13)" on line 93 of the log. The trailing || true then hid the failure, so the install "succeeded" while /usr/bin/voxtype kept pointing at voxtype-avx512 instead of voxtype-vulkan. The "# omarchy:requires-sudo=true" metadata doesn't run the script as root (nor should it — the rest writes to $HOME); it's just router metadata.
Thanks, @sgruendel. This is a real bug, and it is still present on quattro (902fd8ae). bin/omarchy-voxtype-install runs voxtype setup gpu --enable as your user (line 19). That command has to repoint /usr/bin/voxtype, which is root-owned, so it fails with exactly the error you saw. The || true after it hides the failure, and the install reports success while dictation stays on the CPU build. The omarchy:requires-sudo=true line in the script is only metadata for the omarchy command menu. It does not run the script as root, and neither does the first-run invitation that launches it.
The bot reproduced this on a disposable Omarchy VM with the real voxtype-bin 1.1.0 and a Vulkan driver while reviewing the fixes below. On quattro the switch fails with Permission denied (os error 13) and the link stays on voxtype-avx512.
Two open pull requests fix it, and both run the switch with sudo. Both were tested the same way and moved the link to voxtype-vulkan:
Enable Voxtype GPU backend through sudo #12901 is the smaller change. If the switch still fails, it prints a warning and finishes the install on CPU. It is already linked to close this issue.
Either one fixes this on your Radeon 780M. #11110 and #14083 report the same bug.
Reviewed by Claude Opus 5.5, with Codex Medium as a second opinion. Codex agreed with the cause and found nothing more, and it read this diagnosis before reviewing, so it was not a fully independent check.
Next step: the maintainer chooses between #12901 and #13508. Nothing is needed from you.
Activity
omarchybot commentedon Oct 8, 2026
Thanks, @sgruendel. This is a real bug, and it is still present on
quattro(902fd8ae).bin/omarchy-voxtype-installrunsvoxtype setup gpu --enableas your user (line 19). That command has to repoint/usr/bin/voxtype, which is root-owned, so it fails with exactly the error you saw. The|| trueafter it hides the failure, and the install reports success while dictation stays on the CPU build. Theomarchy:requires-sudo=trueline in the script is only metadata for theomarchycommand menu. It does not run the script as root, and neither does the first-run invitation that launches it.The bot reproduced this on a disposable Omarchy VM with the real
voxtype-bin1.1.0 and a Vulkan driver while reviewing the fixes below. Onquattrothe switch fails withPermission denied (os error 13)and the link stays onvoxtype-avx512.Two open pull requests fix it, and both run the switch with
sudo. Both were tested the same way and moved the link tovoxtype-vulkan:voxtype-vulkanbinary, and keeps Intel Haswell GPUs on CPU because Vulkan dictation crashes there (Voxtype install enables Vulkan on Haswell (hasvk) GPUs, causing an endless SIGABRT crash loop #11370).Either one fixes this on your Radeon 780M. #11110 and #14083 report the same bug.
Reviewed by Claude Opus 5.5, with Codex Medium as a second opinion. Codex agreed with the cause and found nothing more, and it read this diagnosis before reviewing, so it was not a fully independent check.
Next step: the maintainer chooses between #12901 and #13508. Nothing is needed from you.